Cart 0
Cart 0

Onewheel Tire Sealant Instructions

Safety First!
Always wear personal protective gear, especially eye protection.  Do not eat, drink, or wear as clothing in public.

For new tire installation:

  • Remove old Onewheel tire
  • Clean rim assembly
  • Lightly coat all bead areas on rim and tire with Armor-Dilloz Bead Buddy to to ease install & reduce pressure needed to seat tire
  • Install new tire
  • Seat bead (Protip: Use restriction ring or other method to prevent over-expansion https://cometkartsales.com/Beadmaster-Tire-Beading-Tool.html)
  • Remove valve core from stem, using included tool
  • Trim tiny bit (1/16”) off of tip of Armor-Dilloz bottle using sharp knife
  • Insert Armor-Dilloz bottle nozzle into valve stem, gently squeeze 8oz into Onewheel tire (squeeze and release repeatedly until 8oz are in tire) 
  • Reinstall valve into stem
  • Inflate tire to riding pressure

For use on existing tire:

  • Remove air from Onewheel tire
  • Remove valve core from stem, using included tool
  • Trim tiny bit (1/16”) off of tip of Armor-Dilloz bottlen using sharp knife
  • Insert Armor-Dilloz bottle nozzle into valve stem, gently squeeze 8oz into Onewheel tire (squeeze and release repeatedly until 8oz are in tire) (Only use 4oz if adding to preexisting sealant)
  • Reinstall valve into stem
  • Inflate tire to riding pressure
  • IF REPAIRING FLAT TIRE: Inflate tire to max safe tire pressure rating as listed on sidewall, and then deflate tire to riding pressure.

    There you have it!  It's that easy to protect your tires with Armor-Dilloz!

    NOTE: When deflating, or connecting air source after Dilloz installation, always ensure that valve stem is at highest possible point so that sealant is not forced out through valve, which may potentially clog valve.