Our hottest product yet - made for those who love to do tail-down sliding stops, the Draggin’ Tail makes sparks fly on any hard stop.
If you’re really good, try doing your favorite tricks with one of these babies on!
Works with or without plates on all Original, Plus and XR boards. Not for use with Pint or V1/Plus style Float Plates (square plates).
Loud, loads of huge sparks that sparkle with an awesome cloud of smoke every time you drop the tail - the Draggin’ Tail is just the thing to take your Onewheel experience to the next level, and can add some fun flair to your group rides, tricks, and photo shoots.
You must be 18+ to get this, don’t use Draggin’ Tail near places where there are surface irregularities that might catch it, or anywhere near stuff that might catch on fire. The rider assumes all risk of injury to body or property and holds harmless the manufacturer and distributor of this product. Hazards using this product include burn injuries, bodily harm or even death. Buyer/Rider assumes all risk and liability, as well as any negligence leading to fire or property damage for 3rd parties.
Avoid cracks and other areas that may catch the Draggin’ Tail, the unit is designed to fail to protect the board and rider, but this is not a feature you want to use.
These are a handmade product, and may have slight irregularities in finish, or slight marks/discoloration - these are a normal part of the manufacturing process, as is the often slight warping that occurs in these due to the heat of welding - they will flex easily as you install them, and will sit tight against your board without trouble.
Proudly Made in Florida, USA!
Instructions: Please read ALL Safety Warnings before installation and use of this product. Install by removing the two bottom screws at the rear of the board, attach the Draggin’ Tail using included screws, install directly on the board, or over your existing metal or plastic plates. Please ensure that you tighten the screws well, but be careful to not overtighten - these go into brass inserts that are set in plastic, so be firm, but don’t go crazy.
You can easily remove the device any time you are in an area where it may be unsafe to use by simply removing the two screws, and replacing them with the original screws.
Safety Warnings: For purchase only by persons 18 years of age or older, and must be used in accordance with all local, state, and federal laws that may apply. The rider assumes all risk of injury to body or property and holds harmless the manufacturer and distributor of this product. Hazards using this product include burn injuries or even death. Rider assumes all risk and liability, as well as any negligence leading to fire or property damage for 3rd parties.
Do not use this product in or near gas stations, dry vegetation, or in proximity to anything else that may catch on fire or otherwise be damaged by this product. This product is for use only outdoors on smooth flat surfaces. Please remain at least 50ft from flammable objects, and do not use during periods of high winds. Do not use in areas that are under wildfire warnings, or otherwise offroad/on trails, the product is easily removed, please do so and be responsible. Use only in a controlled environment, and under close adult supervision.
The first few stops can be a little tricky to get the feel for this - start slow, and please don’t feel the need to tail drag to a full stop from high speed, while that is admittedly fun, and produces a crazy amount of fire, there’s no need - just a light tap at lower speeds will make plenty of sparks while you practice your ability to do emergency stops and tail drags. Do not use this product while moving backwards, or while riding in the opposite direction, it is meant for use only in a dragging manner on the rear plate.
This product may produce slight sharp edges where it is being ground against surfaces, please watch for these, and remove as needed (material is soft aluminum - you can even cut it with a knife if needed). This product should NEVER be used where there are cracks or other surface imperfections that can catch the unit - as this may damage both the unit and your Onewheel.
Check your bolts often for tightness across the entire board, due to the nature of this product’s use environment - there will be a lot of vibration that may loosen bolts, best to catch it early.
There will be some heat/sparks/smoke generated by this that may damage the finish/appearance of your Onewheel, this is normal and to be expected, most of this is easily removed with a simple light scrubbing with a damp toothbrush/cloth. Material/vapor/debris from this may contain traces of rare earth metals - health effects of these metals are not well understood - but the source product we use is generally recognized as safe enough for use as a fire starter in close proximity to the body/face, however, we still recommend using these only in well ventilated areas and away from persons or areas that may be sensitive to such vapors / byproducts. The ferrocerium rods we utilize in the product carry a proposition 65 warning in California.
Any modifications of your Onewheel, and in fact, the use of Onewheel itself carry the risk of great bodily harm or death, please be careful when using our product. All liability for the use or misuse of this product are 100% fully upon the end user / purchaser of this product.